|
|
 |
| |
|
|
Specifications |
– Stroke rate:
– Press:
– Slide units:
– Feed pitch:
– Material:
– Dimensions:
– Weight: |
continuously variable from 5 to max. 350 1/min.
nominal punching capacity 90 kN, stroke 12 mm
max. nominal forming capacity 60 kN, max. stroke 40 mm
mech. feed: max. 120 mm or 240 mm, with feed cycle reduction
NC feed: any feed pitch
max. strip width 60 mm, max. wire-Ø 4 mm
width 2.480 mm, depth 2.060 mm, height 2.220 mm
approx. 3.000 kg (without tooling) |
 Multicenter.pdf (990 KB) |
 |
| |
|
|
Specifications |
– Stroke rate:
– Press:
– Slide units:
– Feed pitch:
– Material:
– Dimensions:
– Weight: |
continuously variable from 5 to max. 250 1/min.
nominal punching capacity 300 kN, stroke 16 mm
max. nominal forming capacity 90 kN, max. stroke 95 mm
mech. feed: max. 200 mm or 500 mm, with feed cycle reduction
NC feed: any feed pitch
max. strip width 80 mm, max. wire-Ø 6 mm
width 3.140 mm, depth 2.250 mm, height 2.390 mm
approx. 6.000 kg (without tooling) |
| Multicenter.pdf (990 KB) |
 |
| |
|
|
Specifications |
– Stroke rate:
– Press:
– Slide units:
– Feed pitch:
– Material:
– Dimensions:
– Weight: |
continuously variable from 5 to max. 150 1/min.
nominal punching capacity 600 kN, stroke 20 mm
nominal punching capacity 700 kN, stroke 16 mm
bell-crank lever unit: max. nominal forming capacity 160 kN,
max. stroke 140 mm
standard slide unit: max. nominal forming capacity 120 kN,
max. stroke 100 mm
mech. feed: max. 350 mm, with feed cycle reduction (crosswise)
mech. feed: max. 150 mm, with feed cycle reduction (lengthwise)
NC feed: any feed pitch
max. strip width 160 mm (lengthwise), 320 mm (crosswise),
max. wire-Ø 10 mm
width 3.580 mm, depth 2.670 mm, height 2.610 mm
approx. 10.000 kg (without tooling) |
| Multicenter.pdf (990 KB) |
|
| |
